ALTEC DIVIDING NETWORK

[LICORNE]

Hi ,

Will there be anny new cross over designed by Iconic for the followings:If so will the wattage input increase on some models.

N 500C 250 watts 12 ohms
N 500F 250 watts 18 ohms
N 500G 80 watts 16 ohms
N 501-8A 100 watts 8 ohms
N 800D 75 watts 16ohms
N 801-8A 100 watts 8 ohms

......................................

[LICORNE]

Hi
We should be able to edit our posts ,would save time.

Fpr 1993 models
The model N 1285 8B Wattage ?
N 500 8H Wattage ?

In my previous post the 250 watts model were for 2 LC.

[Jim D]

To date we have not received any requests for any of the listed models. It takes a considerable amount of development time to design and produce a proper crossover. While it would not be impossible to make our version these units, as of yet there seems to be little or no demand for them, so we have concentrated our efforts to where the demand is.

Most of these crossovers are symmetrical "text book" units. So far all the crossovers we make are of the equalizing type for specific drivers. We are making crossovers that are far better than those that were originally produced by the original manufacturer and will continue to do so. If we were to make any of these, until we see a demand, it would be on a custom basis, which would be to original circuit specifications. As you can imagine there is a huge expense in research and development to "improve" these crossovers.

Currently we make crossovers for the following drivers:

604B with 8 ohm "G/H/K" cone and 8 ohm HF diaphragm

604E- 16 ohms, works also for 604 C & D with "E" cone (16 ohm only)

604-8H and early 604-8K

604-8L and late 604-8K

Model 19, also works with 8-ohm Valencia

Iconic 704-8A

Under Development ---- 604-8G

Steve and Jim

[LICORNE]

Hi,

With thanks from your reply, it certainly clarifies
things.

........

[cholt]

So who can I contact to order a set of model 19 crossovers, how long is production time, will these fit into stock model 19 cabinet crossover slots, what do they look like (any photos of product), any final performance specifications, and what is the cost? Thanks for your comments, every time I email Iconic direct, no response.

[LICORNE]

Hi,

You can try GPA they seem to have the new parts for it. Or perhaps try e-mail all 3 persons responsible at Iconic. One way or the other you should get an answer.

These are upgrades theres no mistake about it.

Ever since a famous country starr had her Klispch Belles fixed . "The company sent 2 technicians and they changed her XO".

This is the way to go with pro home speakers.

Don't worry : call GPA if no answer.

.....................................